Chief Editor:Huang Xuejie

EstablishmentTime: 2012

Adminidrated By: 

China Petroleum and Chemical Industry Federation

Sponsors by: Chemical Industry Press

The Chemical Industry and Engineering Society of China

 

Quick Entry

  • Just Accepted
  • Current Issue
  • Archive
MORE
Volume 15  Issue 10,2026
  • Energy Storage Materials and Devices

    Effects of free sodium on electrode manufacturing and electrochemical performance of sodium-ion batteries

    WANG Yuzuo, SHAO Haitao, LUO Fei, ZHOU Jiali, YANG Jun, LI Wenzhou, QIAO Zhijun, RUAN Dianbo, ZHOU Liping
    Vol. 15, Issue 10, Pages: 3851-3859(2026) DOI: 10.19799/j.cnki.2095-4239.2026.0484
    Abstract:To investigate the effects of free sodium content in layered oxide cathode materials on the engineering fabrication and electrochemical performance of sodium-ion batteries, two layered oxide cathodes with high and low free sodium contents were selected. We systematically analyzed their slurry rheological behavior, electrode manufacturing consistency, interfacial adhesion stability, and cell performance evolution. The results show that both cathode slurries exhibit typical shear-thinning behavior and meet the basic processing requirements for continuous coating. However, a higher free sodium content increases particle interactions and structuralization within the slurry, resulting in higher viscosity, more pronounced thickening during standing, and earlier initial and complete gelation. Electrode testing showed that the high-free-sodium system exhibits greater thickness fluctuations at the edge regions during coating and calendering, as well as poorer electrode consistency and lower peel strength compared to the low-free-sodium system. This suggests weaker interfacial adhesion stability between the coating layer and current collector. Electrochemical tests demonstrate that the low-free-sodium system achieves higher initial discharge capacity, lower alternating current resistance, and lower direct current internal resistance, along with better rate capability, low-temperature discharge performance, and long-term cycling stability. After 800 cycles, the capacity retention of the low-free-sodium system remains close to 92%, surpassing the approximately 90% retention of the high-free-sodium system. These findings indicate that free sodium content in layered oxide cathode materials significantly affects battery polarization behavior and cycling stability by influencing slurry stability and electrode structural uniformity. Therefore, reducing free sodium content is advantageous in enhancing the engineering fabrication stability and overall electrochemical performance of sodium-ion batteries.  
    Keywords:sodium-ion battery;free sodium;slurry stability;electrode consistency;electrochemical performance  
    294
    |
    189
    |
    0
    <HTML>
    <L-PDF><Meta-XML>
    <Citation><Bulk Citation>
    Updated:2026-10-22
  • Energy Storage Materials and Devices

    Enhancing cathode interface stability in sodium-ion batteries via fluorinated amide fdma-modified polymer electrolyte

    Abstract:Polymer electrolytes are inherent safe and mechanically flexible, making them promising candidates for high-safety sodium-ion batteries. However, conventional poly(vinylidene fluoride) (PVDF)-based polymer electrolytes typically exhibit low room-temperature ionic conductivity and insufficient electrochemical stability at interfaces with layered oxide cathodes, limiting their application in long-life sodium-ion batteries. To address these issues, 2,2,2-trifluoro-N,N-dimethylacetamide (FDMA) was introduced as a functional additive into a PVDF-NaTFSI electrolyte, yielding a composite polymer electrolyte with enhanced ionic conductivity and interfacial stability. The carbonyl oxygen in FDMA coordinates with Na+, thereby weakening the interaction between Na+ and TFSI and promoting NaTFSI dissociation. Consequently, the composite electrolyte achieves a room-temperature ionic conductivity of 2.62 mS/cm. Density functional theory calculations reveal that FDMA has a low highest occupied molecular orbital energy level, which contributes to the improved oxidative stability of the composite electrolyte. When coupled with O3-type sodium-ion cathode materials in full cells, the PVDF-NaTFSI-FDMA electrolyte enables FDMA-mediated regulation of cathode/electrolyte interfacial chemistry, promoting the formation of a NaF-rich CEI layer. This robust interphase effectively suppresses continuous parasitic reactions between the cathode and electrolyte, thereby mitigating structural degradation of the cathode during cycling. The NaCu0.12Fe0.22Mn0.33Ni0.33O2||Na cell using the FDMA-modified electrolyte retains 85.5% of its capacity after 600 cycles at 1 C within a voltage range of 2.0—4.0 V. These results demonstrate that FDMA can simultaneously improve ion transport in PVDF-based polymer electrolytes and stabilize the cathode-electrolyte interface, providing an experimental basis for developing safe and long-life sodium-ion batteries based on solid polymer electrolytes.  
    Keywords:sodium-ion batteries;Polymer electrolyte;cathode–electrolyte interlayer;cycling stability  
    120
    |
    154
    |
    0
    <HTML>
    <L-PDF><Meta-XML>
    <Citation><Bulk Citation>
    Updated:2026-10-22
  • Energy Storage Materials and Devices

    Optimization and performance of NaBr-HCOONa-water solution-based low-temperature phase change materials for ultra-low temperature cold storage

    LIANG Wei, WANG Xiulin, LIU Bowen, XU Jiawei, LI Musen, HUA Weisan
    Vol. 15, Issue 10, Pages: 3871-3879(2026) DOI: 10.19799/j.cnki.2095-4239.2026.0365
    Abstract:To address the high energy consumption of cold storage at -28℃ to -40℃ and overcome technical challenges (such as low latent heat, poor thermal conductivity, insufficient cycle stability, severe thermal conductive filler agglomeration, and phase separation) associated with conventional phase-change materials (PCMs), this study develops a composite eutectic saltwater-based PCM for cold storage using sodium bromide (NaBr), sodium formate (HCOONa), and deionized water (DI). By optimizing the eutectic composition and incorporating xanthan gum combined with expanded graphite (EG), i.e., xanthan gum-EG, to enhance thermal conductivity, a novel PCM suitable for off-peak-electricity thermal energy storage (TES) in cold-storage systems is fabricated. Systematic screening of multiple gradient compositions determines the optimal base-liquid mass ratio as NaBr∶HCOONa∶DI=32∶8∶60; the resulting NaBr-HCOONa-DI solution exhibits a phase-transition temperature of -32.7℃, a latent heat of 182 kJ/kg, and a thermal conductivity of 0.7913 W/(m·K). Incorporating xanthan gum-EG (xanthan gum loading=0.3%) significantly improves EG dispersion uniformity in the high-salt system. At an EG loading of 2.5%, the thermal conductivity reaches 1.1420 W/(m·K), representing a 44.32% improvement over the base liquid. The modified PCM exhibits a phase-transition temperature of -33.1℃ and a latent heat of 167.4 kJ/kg. After 300 freeze-thaw cycles, the phase-transition temperature decreases by only 0.2℃, while the latent heat and thermal conductivity reduce by 8.54% and 4.63%, respectively. No noticeable phase separation occurs, satisfying national standards for the stable operation of low-temperature PCMs. Corrosion tests reveal that these composite materials exhibit corrosion rates of only 0.0042 and 0.0022 g/(m2·h) on 304 and 316 stainless steels, respectively, which are significantly lower than those observed on carbon steel and copper, confirming that stainless steel encapsulation is highly suitable. Compared with previous low-temperature TES materials in the same temperature range, this composite system offers superior latent heat and thermal conductivity, making it ideal for energy-saving peak-shaving systems in low-temperature storage. Consequently, the material holds strong potential for engineering applications, delivering substantial energy conservation and carbon-reduction benefits.  
    Keywords:cold chain logistics;phase-change materials;thermal conductivity enhancement;Cycle stability;corrosion resistance  
    104
    |
    87
    |
    0
    <HTML>
    <L-PDF><Meta-XML>
    <Citation><Bulk Citation>
    Updated:2026-10-22
  • Energy Storage Materials and Devices

    Recent advances in phosphorus-based heterostructure anodes for rechargeable batteries

    SU Zhiyi, ZHANG Shuhan, ZHANG Zhiyuan, WU Huan, PENG Zhangqiuyuan, LIU Xiaojing, YAN Bo, YANG Xuelin
    Vol. 15, Issue 10, Pages: 3880-3894(2026) DOI: 10.19799/j.cnki.2095-4239.2026.0486
    Abstract:Phosphorus-based materials are promising anode candidates for next-generation high-energy-density rechargeable batteries because of their high theoretical capacity and suitable operating potential. However, their practical application is still hindered by several intrinsic challenges, including low electrical conductivity, severe alloying-reaction-induced volume expansion, and cycling-triggered electrode-interface/structure instability. Consequently, heterostructure engineering has emerged as an effective strategy for overcoming the long-standing limitations of phosphorus anodes. Benefiting from unique interfacial electronic effects and synergistic interactions between different components, heterostructures effectively promote charge transport, alleviate mechanical strain, and improve structural stability during repeated cycling. This review begins with an overview of the structural characteristics and physicochemical properties of phosphorus allotropes, including white, red, black, violet, and blue phosphorus. Thereafter, it systematically summarizes their energy storage behaviors, distinctions, advantages, and limitations. The review particularly explores the design and construction of various phosphorus-based heterostructures, including phosphorus-phosphorus, phosphorus-carbon, phosphorus-metal, and phosphorus-inorganic/organic systems, together with their interfacial structure-property relationships. By elucidating the underlying heterointerface physicochemical mechanisms, especially chemical bonding characteristics, band alignment, and built-in electric fields, the review further clarifies the fundamental principles governing the transport kinetics of ions and electrons, the suppression of soluble-polyphosphide shuttling, and the preservation of electrode structural integrity. Finally, the review discusses future perspectives for phosphorus-based heterostructures, emphasizing that the combination of precise interfacial engineering with multiscale structural design will be indispensable for developing high-performance, long-lifespan energy storage devices.  
    Keywords:phosphorus;allotropes;heterostructures;anode materials;rechargeable batteries  
    79
    |
    93
    |
    0
    <HTML>
    <L-PDF><Meta-XML>
    <Citation><Bulk Citation>
    Updated:2026-10-22
  • Energy Storage Materials and Devices

    Research progress on dendrite suppression and interface compatibility in all-solid-state lithium metal batteries

    Abstract:All-solid-state lithium-metal batteries (ASSLMBs) combine a high theoretical energy density (>500 Wh/kg) with intrinsic safety owing to their nonflammable solid-electrolyte components. Consequently, they have emerged as a compelling alternative to conventional liquid-electrolyte lithium-ion batteries whose energy density is approaching practical limits and whose safety remains a persistent concern. However, their industrialization is severely hindered by two intertwined challenges: continuous lithium dendrite growth and penetration during repeated charge/discharge cycling and poor solid-solid interfacial contact between the lithium-metal anode and the solid electrolyte, which induces high interfacial resistance and detrimental side reactions. This study systematically reviews recent advances in addressing these issues, becoming the first to propose a three-tiered synergistic suppression framework that integrates (1) mechanical blocking via high-modulus electrolytes or rigid interlayers, (2) ionic-flux modulation via lithiophilic-site design and deposition-space confinement, and (3) dynamic self-healing enabled by adaptive interfacial reconstruction during cycling. Based on this framework, existing technical approaches are reclassified and critically compared. A comprehensive evaluation system is further established across three dimensions (material systems, interface architectures, and fabrication processes) to enable an objective assessment of different strategies. The analysis yields three key findings. First, sulfide electrolytes modified with artificial solid electrolyte interface layers, such as LiF/LiZn composites, exhibit outstanding critical current density (CCD ≥ 1.5 mA/cm2) and long-term cycling stability (>500 cycles), making them the most promising candidates for near-term industrial deployment. Second, a high Young's modulus alone cannot completely suppress dendrite penetration; thus, it must be synergistically combined with deposition-kinetics control—for instance, via lithiophilic nucleation sites or bottom-up deposition structures that guide uniform lithium growth. Third, the lack of standardized evaluation protocols severely complicates the comparison of results across different studies, as test conditions vary widely (e.g., applied pressures from 0.1 to 10 MPa, current densities, and temperatures). To address this, we recommend adopting a minimum of four core metrics: initial interfacial impedance, impedance-change rate after 100 cycles (target ≤ 20%), CCD (target ≥ 1.0 mA/cm2), and X-ray photoelectron spectroscopy-quantified interfacial-byproduct proportion (target ≤5%). Finally, this review identifies three critical research gaps urgently requiring further investigation: (a) the dynamic evolution of interfaces during cycling, which lacks in situ high-resolution characterization data; (b) multiphysical-field-coupled models for predicting dendrite growth thresholds, for which no standardized phase-field parameter database exists; and (c) scalable, low-cost solution-based interfacial processing techniques, as conventional methods, such as magnetron sputtering, are challenging to scale up. This study offers an integrated analytical framework, clear industrialization pathways, and standardized evaluation recommendations, potentially facilitating the transition of all-solid-state lithium-anode research from laboratory to practical applications.  
    Keywords:All-solid-state battery;metallic lithium anode;Lithium dendrite inhibition;Interface compatibility;solid electrolyte  
    186
    |
    115
    |
    0
    <HTML>
    <L-PDF><Meta-XML>
    <Citation><Bulk Citation>
    Updated:2026-10-22
  • Energy Storage Materials and Devices

    Structural design strategies and energy storage performance optimization of MXene/biomass composites

    TIAN Yunfeng, WU Huiqiong, SU Juncheng, LI Zhaoxia, SU Qiong
    Vol. 15, Issue 10, Pages: 3909-3927(2026) DOI: 10.19799/j.cnki.2095-4239.2026.0530
    Abstract:MXene materials have emerged as promising candidates for energy storage applications, particularly in supercapacitors, by virtue of their excellent electrical conductivity, rich surface functional groups, and superior ion transport capability. However, MXene films still suffer from critical limitations, including the facile restacking of nanosheets, poor structural stability, and constrained ion diffusion kinetics, which severely impede the further optimization of their electrochemical performance. Biomass materials possess distinct advantages of abundant reserves, superior sustainability, and unique structural and functional characteristics, such as hierarchical porous architectures, favorable surface wettability, excellent mechanical flexibility, and in-situ heteroatom doping, providing enormous potential for the structural design and performance modulation of high-performance energy storage electrodes. The hybridization of MXene with biomass materials enables prominent synergistic effects, which effectively suppress nanosheet restacking, optimize interfacial structures, expand ion transport channels, and enhance electrochemical activity. This paper systematically reviews the synthetic strategies of MXene and the fabrication approaches of MXene/biomass composites. The structural design tactics of MXene/biomass composites and their underlying mechanisms for boosting energy storage performance are comprehensively summarized, with emphases on interlayer structure regulation, hierarchical pore construction, conductive network fabrication, mechanical property enhancement, and interfacial coupling modulation. Furthermore, the current challenges and future development directions of MXene/biomass composites are discussed from the perspectives of green and sustainable synthesis, interfacial structure-activity relationship analysis, device integration, and practical application. This review provides valuable references for the rational design and efficient utilization of high-performance and eco-friendly energy storage materials.  
    Keywords:MXene;biomass;structural design;energy storage performance;supercapacitors  
    118
    |
    98
    |
    0
    <HTML>
    <L-PDF><Meta-XML>
    <Citation><Bulk Citation>
    Updated:2026-10-22
SEE MORE

  • Editor's Recommendation
MORE

Editor's Recommendation

MORE

Warning method for battery-overcharge thermal runaway based on a temporal pattern attention mechanism and an isolated forest algorithm

Lithium-ion battery (LIB) thermal runaway proceeds rapidly and violently representing a significant challenging in the field of energy-storage safety, as it can initiate thermal propagation within energy storage systems and lead to losses. To meet the timeliness requirements for early warning of overcharge-induced thermal runaway in LIBs, an early warning method integrating the temporal pattern attention (TPA) mechanism, bidirectional long short-term memory (BiLSTM) network, and isolation forest algorithm is proposed. In this method, the changing patterns of battery-state characteristics across multiple time steps are first captured using TPA, which applies differentiated weighting to focus on the mostvaluable information. Subsequently, the bidirectional neural network structure of BiLSTM is used to extract bidirectional information from battery-characteristic data, thus enhancing the prediction accuracy of the model. Finally, by integrating the isolation forest algorithm, the real battery dataset is used to establish an isolation forest model, which calculates the anomaly scores of battery-state characteristics. Thereafter, the battery states are classified by selecting the optimal anomaly score threshold, enabling early warning of abnormal battery conditions. The experimental results reveal that the proposed method achieves an F1 score of 0.9509 and can provide early warning of abnormal battery conditions 7 s before overcharge-induced thermal runaway; this time is 252 s earlier than that of the temperature threshold method. Overall, the method demonstrated here offers insights into enhancing the accuracy and timeliness of early warning for overcharge-induced thermal runaway in LIBs.

> Energy Storage System and Engineering

Warning method for battery-overcharge thermal runaway based on a temporal pattern attention mechanism and an isolated forest algorithm