二水合硫酸钙多孔复合热化学储热材料的制备及热性能研究

杨光; 牟飞; 李元元; 程晓敏

doi:10.19799/j.cnki.2095-4239.2025.1010

您当前的位置：

首页 >

文章列表页 >

二水合硫酸钙多孔复合热化学储热材料的制备及热性能研究

储热储冷多场景应用专刊 | 更新时间：2026-07-01

- 二水合硫酸钙多孔复合热化学储热材料的制备及热性能研究
- Preparation and thermal performance of porous composite thermochemical heat storage materials of calcium sulfate dihydrate
- 储能科学与技术 2026年15卷第3期页码：735-746
- 作者机构：
  
  武汉理工大学材料科学与工程学院，湖北武汉 430070
- 作者简介：
  
  杨光（2000—），男，硕士研究生，研究方向为热化学储热，E-mail：316822776@qq.com；
  李元元，副教授，研究方向为热管理，E-mail：10426@whut.edu.cn。
- 基金信息：
  
  湖北省揭榜科技项目(2024BEB012;2024BEB022)
- DOI：10.19799/j.cnki.2095-4239.2025.1010
  中图分类号： TB 34;TB 33;TK 02
- 收稿：2025-11-10，
  
  修回：2025-12-07，
  
  纸质出版：2026-03-28
- 稿件说明：
移动端阅览
杨光, 牟飞, 李元元, 等. 二水合硫酸钙多孔复合热化学储热材料的制备及热性能研究[J]. 储能科学与技术, 2026, 15(3): 735-746.

YANG Guang, MU Fei, LI Yuanyuan, et al. Preparation and thermal performance of porous composite thermochemical heat storage materials of calcium sulfate dihydrate[J]. Energy Storage Science and Technology, 2026, 15(3): 735-746.
杨光, 牟飞, 李元元, 等. 二水合硫酸钙多孔复合热化学储热材料的制备及热性能研究[J]. 储能科学与技术, 2026, 15(3): 735-746. DOI： 10.19799/j.cnki.2095-4239.2025.1010.

YANG Guang, MU Fei, LI Yuanyuan, et al. Preparation and thermal performance of porous composite thermochemical heat storage materials of calcium sulfate dihydrate[J]. Energy Storage Science and Technology, 2026, 15(3): 735-746. DOI： 10.19799/j.cnki.2095-4239.2025.1010.

摘要

二水合硫酸钙(CaSO

·2H

O)作为磷石膏的主要成分，具有储热密度高、成本低廉、来源广泛等优势，其脱水/水合可逆反应可实现中温领域热能的高效存储与释放，在太阳能中温集热、工业余热回收等场景中具有巨大应用潜力。但该材料具有固有热导率低、循环过程中易团聚和板结的缺陷，严重制约了其传热传质与长期服役稳定性，成为其工程化应用的核心难题。为解决上述问题，本研究以CaSO

·2H

O为储热基体，通过功能组分协同改性与多孔结构复合策略，开展了热化学储热材料的制备与性能优化研究。具体采用溶液合成法制备高纯度CaSO

·2H

O粉末，添加质量分数为3%的膨胀石墨(EG)作为导热增强相、5%的纳米二氧化硅(SiO

)作为团聚抑制剂，经球磨工艺制备CaSO

·2H

O/3EG/5SiO

储热基质(HSM)，再通过真空浸渍法将储热基质与多孔泡沫铜(CF)复合，构建CF@HSM多孔复合热化学储热材料。借助扫描电子显微镜(SEM)、X射线衍射仪(XRD)、傅里叶变换红外光谱仪(FTIR)、差示扫描量热仪(DSC)、激光导热仪等表征手段，系统分析材料的微观形貌、晶体结构、化学相容性、热性能及循环稳定性。结果表明，膨胀石墨的高导热特性使CaSO

·2H

O热导率从0.577 W/(m·K)提升至0.797 W/(m·K)，提升幅度达38.1%；纳米二氧化硅通过分散颗粒、抑制晶界迁移，显著改善了材料循环后的团聚现象；泡沫铜的多孔结构与高导热性进一步优化了传热传质路径，使复合后材料热导率提升至1.509 W/(m·K)，较纯CaSO

·2H

O提高161.5%。该复合材料焓值达359 J/g、封装率为70.4%、反应温度区间为120~160℃，与太阳能中温集热条件高度适配；经80次水合/脱水循环后，储热密度仍保持在92.3%，晶体结构与化学相容性未发生明显变化，循环稳定性优异。本研究通过多孔结构与功能组分改性的协同设计，有效破解了水合盐热化学储热体系热导率低、易团聚的关键技术难题，为水合盐类储热材料的性能优化提供了兼具科学性与实用性的新策略，同时为磷石膏资源化利用开辟了高附加值应用路径，对推动中温热化学储热技术的工程化应用具有重要参考价值。

Abstract

Calcium sulfate dihydrate (CaSO

·2H

the main component of phosphogypsum

exhibits significant potential for medium-temperature thermal energy stor

age because of its high heat storage density

low cost

and wide availability. Its reversible dehydration-hydration reaction enables efficient thermal energy storage and release

making it suitable for applications such as medium-temperature solar heat collection and industrial waste heat recovery. However

inherent limitations

including low thermal conductivity and severe agglomeration during cycling

restrict heat and mass transfer efficiency and long-term operational stability

thereby hindering engineering applications. To address these challenges

this study focuses on the preparation and performance optimization of thermochemical heat storage materials through synergistic modification using functional additives and a composite porous structure. High-purity CaSO

·2H

O powder was synthesized via a solution method. Subsequently

3% expanded graphite was introduced as a thermal conductivity enhancer and 5% nano-silica (SiO

) as an agglomeration inhibitor

followed by ball milling to obtain a CaSO

·2H

O /3EG/5SiO

heat storage matrix. A porous composite thermochemical heat storage material was then fabricated by vacuum impregnation of the matrix into porous copper foam. The microstructure

crystal structure

chemical compatibility

thermal performance

and cyclic stability were systematically characterized using scanning electron microscopy

X-ray diffraction

Fourier transform infrared spectroscopy

differential scanning calorimetry

and a laser thermal conductivity tester. The results show that the incorporation of expanded graphite increases the thermal conductivity of CaSO

·2H

O from 0.577 W/(m·K) to 0.797 W/(m·K)

corresponding to an improvement of 27.6%. Nano-SiO

effectively suppresses particle agglomeration after cycling by enhancing particle dispersion and inhibiting grain boundary migration. The porous structure and high thermal conductivity of copper foam further improve heat and mass transfer pathways

resulting in a thermal conductivity of 1.509 W/(m·K)

which is 161.5% higher than that of pure CaSO

·2H

O. The composite material exhibits a reaction enthalpy of 359 J/g

a packaging efficiency of 70.4%

and an operating temperature range of 120—160℃

which is well matched with medium-temperature solar thermal systems. After 80 hydration-dehydration cycles

the heat storage density remains at 92.3%

with no significant changes in crystal structure or chemical compatibility

demonstrating excellent cyclic stability. Through the synergistic design of porous support and functional modification

this study effectively addresses the key challenges of low thermal conductivity and agglomeration in hydrated salt thermochemical heat storage systems

providing a practical strategy for performance enhancement and high-value utilization of phosphogypsum resources.

关键词

Keywords

references

NEHRING R. Traversing the mountaintop: World fossil fuel production to 2050[J]. Philosophical Transactions of the Royal Society of London Series B, Biological Sciences, 2009, 364(1532): 3067-3079. DOI:10.1098/rstb.2009.0170.

吴娟, 龙新峰. 热化学储能的研究现状与发展前景[J]. 现代化工, 2014, 34(9): 17-21, 23. DOI:10.16606/j.cnki.issn0253-4320.2014. 09.041.

WU J, LONG X F. Research status and prospects for thermochemical energy storage[J]. Modern Chemical Industry, 2014, 34(9): 17-21, 23. DOI:10.16606/j.cnki.issn0253-4320. 2014.09.041.

BENNICI S, POLIMANN T, ONDARTS M, et al. Long-term impact of air pollutants on thermochemical heat storage materials[J]. Renewable and Sustainable Energy Reviews, 2020, 117: 109473. DOI:10.1016/j.rser.2019.109473.

刘真威, 丁耀东, 陶于兵, 等. 基于水合盐的低温热化学储能研究进展[J]. 中南大学学报(自然科学版), 2022, 53(12): 4771-4788. DOI:10.11817/j.issn.1672-7207.2022.12.018.

LIU Z W, DING Y D, TAO Y B, et al. Research progress of hydrate salt-based thermochemical energy storage at low temperature[J]. Journal of Central South University (Science and Technology), 2022, 53(12): 4771-4788. DOI:10.11817/j.issn.1672-7207.2022.12.018.

SHARMA A, TYAGI V V, CHEN C R, et al. Review on thermal energy storage with phase change materials and applications[J]. Renewable and Sustainable Energy Reviews, 2009, 13(2): 318-345. DOI:10.1016/j.rser.2007.10.005.

ANUAR SHARIF M K, AL-ABIDI A A, MAT S, et al. Review of the application of phase change material for heating and domestic hot water systems[J]. Renewable and Sustainable Energy Reviews, 2015, 42: 557-568. DOI:10.1016/j.rser.2014.09.034.

FERNÁNDEZ A G, FULLANA M, CALABRESE L, et al. Corrosion assessment of promising hydrated salts as sorption materials for thermal energy storage systems[J]. Renewable Energy, 2020, 150: 428-434. DOI:10.1016/j.renene.2020.01.001.

CHAATOUF D, SALHI M, RAILLANI B, et al. Parametric analysis of a sensible heat storage unit in an indirect solar dryer using computational fluid dynamics[J]. Journal of Energy Storage, 2022, 49: 104075. DOI:10.1016/j.est.2022.104075.

HUA W S, YAN H F, ZHANG X L, et al. Review of salt hydrates-based thermochemical adsorption thermal storage technologies[J]. Journal of Energy Storage, 2022, 56: 106158. DOI:10.1016/j.est.2022.106158.

FOPAH LELE A, KUZNIK F, RAMMELBERG H U, et al. Thermal decomposition kinetic of salt hydrates for heat storage systems[J]. Applied Energy, 2015, 154: 447-458. DOI:10.1016/j.apenergy.2015.02.011.

KERSKES H, BERTSCH F, METTE B, et al. Thermochemische energiespeicher[J]. Chemie Ingenieur Technik, 2011, 83(11): 2014-2026. DOI:10.1002/cite.201100091.

BAGHERISERESHKI E, TRAN J, LEI F Q, et al. Investigation into SrO/SrCO 3 for high temperature thermochemical energy storage[J ] . Solar Energy, 2018, 160: 85-93. DOI:10.1016/j.solener.2017.11.073.

杨慧, 童莉葛, 尹少武, 等. 水合盐热化学储热材料的研究概述[J]. 材料导报, 2021, 35(17): 17150-17162. DOI:10.11896/cldb.20030164.

YANG H, TONG L G, YIN S W, et al. A review on the salt hydrate thermochemical heat storage materials[J]. Materials Review, 2021, 35(17): 17150-17162. DOI:10.11896/cldb.20030164.

ZHANG Q Y, WU Y F, DONG S H, et al. Development of activated carbon/CaCl 2 composites for seasonal thermochemical energy storage: Effect of pore structure[J ] . Journal of Energy Storage, 2024, 97: 112697. DOI:10.1016/j.est.2024.112697.

GAEINI M, SHAIK S A, RINDT C C M. Characterization of potassium carbonate salt hydrate for thermochemical energy storage in buildings[J]. Energy and Buildings, 2019, 196: 178-193. DOI:10.1016/j.enbuild.2019.05.029.

BEVING M A J M, FRIJNS A J H, RINDT C C M, et al. Effect of cycle-induced crack formation on the hydration behaviour of K 2 CO 3 particles: Experiments and modelling[J ] . Thermochimica Acta, 2020, 692: 178752. DOI:10.1016/j.tca.2020.178752.

江涛, 乔雪园, 童军, 等. 长江经济带磷石膏资源化利用现状、问题及对策[J/OL]. 化学与生物工程, 1-8. https://link.cnki.net/urlid/42.1710.TQ.20250507.1110.002.

JIANG T, QIAO X Y, TONG J, et al. The current situation, problems and countermeasures of phosphogypsum resource utilization in the Yangtze River Economic Belt[J/OL]. Chemical and Biological Engineering, 1-8. https://link.cnki.net/urlid/42.1710.TQ.20250507.1110.002.

冯一帆, 蒋思炯, 付鑫, 等. 储热技术现状及相变储热材料的研究进展[J]. 信息记录材料, 2023, 24(2): 32-36. DOI:10.16009/j.cnki.cn13-1295/tq.2023.02.055.

FENG Y F, JIANG S J, FU X, et al. Current status of heat storage technology and research progress of phase change thermal storage materials[J]. Information Recording Materials, 2023, 24(2): 32-36. DOI:10.16009/j.cnki.cn13-1295/tq.2023.02.055.

翁立奎, 张叶龙, 姜琳, 等. 基于水合盐的热化学吸附储热技术研究进展[J]. 储能科学与技术, 2020, 9(6): 1729-1736. DOI:10.19799/j.cnki.2095-4239.2020.0168.

WENG L K, ZHANG Y L, JIANG L, et al. Research progress on thermochemical adsorption heat storage technology based on hydrate[J]. Energy Storage Science and Technology, 2020, 9(6): 1729-1736. DOI:10.19799/j.cnki.2095-4239.2020.0168.

张鸿宇, 钱志强, 刘剑鑫, 等. 无机水合盐相变储能材料性能优化及应用进展[J]. 盐湖研究, 2024, 32(4): 91-103. DOI:10.3724/j.yhyj.2024021.

ZHANG H Y, QIAN Z Q, LIU J X, et al. Inorganic hydrated salt phase-change materials: Property optimization and applications[J]. Journal of Salt Lake Research, 2024, 32(4): 91-103. DOI:10.3724/j.yhyj.2024021.

HUANG H Y, LI J, HUHETAOLI, et al. Porous-resin-supported calcium sulfate materials for thermal energy storage[J]. Energy Technology, 2016, 4(11): 1401-1408. DOI:10.1002/ente.201600174.

KARIYA J, RYU J, KATO Y. Reaction performance of calcium hydroxide and expanded graphite composites for chemical heat storage applications[J]. ISIJ International, 2015, 55(2): 457-463. DOI:10.2355/isijinternational.55.457.

WANG K, ZHANG C M, LIU B C, et al. Agglomeration inhibition mechanism of SiO 2 in the Ca(OH) 2 /CaO thermochemical heat storage process: A reactive molecular dynamics study[J ] . Chemical Engineering Journal, 2024, 480: 148118. DOI:10.1016/j.cej.2023.148118.

CHEN X Y, JIN X G, LIU Z M, et al. Experimental investigation on the CaO/CaCO 3 thermochemical energy storage with SiO 2 doping[J ] . Energy, 2018, 155: 128-138. DOI:10.1016/j.energy.2018.05.016.

贾彩云. 石膏利用的结晶学基础[D]. 杭州: 浙江大学, 2021.JIA C Y. Crystallographic basis of gypsum utilization[D]. Hangzhou: Zhejiang University, 2021.

YANG B, ZHANG R R, GAO Z, et al. Effect of nanoparticles and metal foams on heat transfer properties of PCMs[J]. International Journal of Thermal Sciences, 2022, 179: 107567. DOI:10.1016/j.ijthermalsci.2022.107567.

郭宇. 纳米修饰金刚石-氧化物陶瓷复合材料的高温高压合成研究[D]. 长春: 吉林大学, 2024.GUO Y. High-temperature and high-pressure synthesis of nano modified diamond oxide ceramic composites[D]. Changchun: Jilin University, 2024.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

草酸钙基多孔复合热化学储热材料制备及其储热性能研究

苏氨酸提升铁铬液流电池循环稳定性与抑制析氢的研究

多孔金属泡沫强化石蜡相变蓄热性能

铁铬液流电池电堆空间排布对气相析出与供液均衡性的影响

钠离子电池固体电解质界相的溶解性及电解液改善策略