1.同济大学汽车与能源学院,同济大学新能源汽车工程中心,上海 201804
2.安徽开阳科技有限公司,安徽芜湖 241000
3.奇瑞汽车股份有限公司,安徽 芜湖 241000
孙淑婷(1989—),女,硕士。主要研究方向为新能源汽车电池管理系统算法与嵌入式开发、新型能源(超级电容、氢能等)车端应用。E-mail:sstfync@126.com;
郑俊生,教授,博士生导师,从事超级电容、电化学储能器件研究,E-mail:jszheng@tongji.edu.cn。
收稿:2026-03-25,
修回:2026-04-13,
纸质出版:2026-05-28
移动端阅览
孙淑婷, 刘闯, 刘瑞, 等. 锂离子电容器预锂化技术:现状、局限与展望[J]. 储能科学与技术, 2026, 15(5): 1812-1823.
SUN Shuting, LIU Chuang, LIU Rui, et al. Pre-lithiation technology for lithium-ion capacitors: Current status, limitations, and prospects[J]. Energy Storage Science and Technology, 2026, 15(5): 1812-1823.
孙淑婷, 刘闯, 刘瑞, 等. 锂离子电容器预锂化技术:现状、局限与展望[J]. 储能科学与技术, 2026, 15(5): 1812-1823. DOI: 10.19799/j.cnki.2095-4239.2026.0238.
SUN Shuting, LIU Chuang, LIU Rui, et al. Pre-lithiation technology for lithium-ion capacitors: Current status, limitations, and prospects[J]. Energy Storage Science and Technology, 2026, 15(5): 1812-1823. DOI: 10.19799/j.cnki.2095-4239.2026.0238.
锂离子电容器兼具高能量密度与高功率密度优势,在电网调频、数据中心功率补偿等场景中极具应用潜力。但其负极在循环过程中固态电解质界面的形成和不可逆嵌锂行为,会造成大量活性锂损耗,严重影响器件性能。预锂化是解决这一瓶颈的关键技术,但深度预锂化引发的“不可逆锂”生成与固态电解质界面失效,使器件高能量密度与长循环寿命难以兼顾。本文系统梳理了预锂化在补偿初始锂损失、构建锂源储备和拓宽电压窗口三方面的核心作用,分析了深度预锂化条件下“不可逆锂”的生成机理与固态电解质界面“自加速”失效机制,重点对比了直接接触、电化学、化学及正极预锂化4种技术路径,指出各类方法在应对“高补锂量-界面稳定性”核心矛盾时的固有局限。评述了当前在参数调控、界面修饰及界面组成优化方面的研究进展,认为现有策略尚未从热力学与动力学源头解决“不可逆锂”生成这一问题。最后,提出未来应聚焦“不可逆锂”源头规避、层级结构界面可控制备以及工艺工程化适配三个方向,以期为高性能锂离子电容器的设计提供参考。
Lithium-ion capacitors (LICs) combine high energy density and high power density
demonstrating considerable potential for several applications such as grid frequency regulation and power compensation for data centers. However
the formation of the solid electrolyte interphase (SEI) and irreversible lithium insertion into the anode during cycling lead to substantial consumption of active lithium
considerably reducing the device performance. Prelithiation is considered a key strategy to address this problem; nevertheless
deep prelithiation induces "irreversible lithium" formation and SEI degradation. Thus
it is challenging to simultaneously achieve high energy density and long cycle life. This review systematically analyzes the critical roles of prelithiation in compensating for the initial lithium loss
constructing lithium reservoirs
and widening the operating voltage window
and it reveals the generation mechanism of "irreversible lithium" under deep prelithiation conditions as well as the SEI "self-accelerating" failure mechanism. In addition
four representative prelithiation strategies
i.e.
direct-contact
electrochemical
chemical
and cathode prelithiation
are comparatively evaluated. The inherent limitations of these strategies in addressing the fundamental trade-off between high lithium compensation and interfacial stability are also discussed. Moreover
Recent advances in parameter regulation
interfacial modification
and interphase composition optimization are summarized. The study indicates that
from thermodynamic and kinetic perspectives
the existing strategies have not yet fundamentally resolved the formation of "irreversible lithium." Finally
future research directions
including "irreversible lithium" mitigation at its origin
controllable fabrication of hierarchical interfacial structures
and enhancement of the compatibility with scalable engineering processes
are proposed to guide the design of high-performance LICs.
国家发展改革委, 国家能源局. 新型储能规模化建设专项行动方案(2025—2027年). 发改能源(2025)1144 号, 2025[R].National Development and Reform Commission, National Energy Administration. Special action plan for large-scale construction of new energy storage (2025—2027). Fa Gai Neng Yuan [2025] No. 1144, 2025[R].
LIU H, ZHAO L Y, YE Y S, et al. Extremely fast-charging batteries: Principle, strategies, detection, and prediction[J]. Chemical Reviews, 2025, 125(20): 9553-9678. DOI:10.1021/acs.chemrev.5c00203.
PARVIN N, MERUM D, KANG M, et al. Recent advances in hybrid supercapacitors: A review of high performance materials and scalable fabrication techniques[J]. Journal of Materials Chemistry A, 2025, 13(30): 24320-24386.
LI S N, XU Y N, ZHANG X D, et al. Anode materials for lithium-ion capacitors: From fundamental mechanisms to design strategies[J]. Energy Storage Materials, 2025, 80: 104404. DOI:10.1016/j.ensm.2025.104404.
JEON S, LM S, KANG I, et al. Solution-based deep prelithiation for lithium-ion capacitors with high energy density[J]. Small, 2024, 20(30): 2401295. DOI:10.1002/smll.202401295.
LIN Z W, TONG Z, CAI H W, et al. Prelithiation technology for high energy density lithium-ion batteries: Design, progress, advantages and challenges[J]. Energy Storage Materials, 2025, 83: 104709. DOI:10.1016/j.ensm.2025.104709.
OGLEY M J W, JOHNSTON B I J, HALL D S, et al. Understanding degradation in single-crystalline Ni-rich Li-ion battery cathodes[J]. Chemical Reviews, 2025, 125(20): 9774-9806.
张晓虎, 孙现众, 张熊, 等. 锂离子电容器在新能源领域应用展望[J]. 电工电能新技术, 2020, 39(11): 48-58. DOI: 10.12067/ATEEE2001022.
ZHANG X H, SUN X Z, ZHANG X, et al. Prospect of lithium-ion capacitor application in new energy field[J]. Advanced Technology of Electrical Engineering and Energy, 2020, 39(11): 48-58. DOI: 10.12067/ATEEE2001022.
YUE X Y, YAO Y X, ZHANG J, et al. The raw mixed conducting interphase affords effective prelithiation in working batteries[J]. Angewandte Chemie International Edition, 2022, 61(29): e202205697. DOI:10.1002/anie.202205697.
ZHANG S Q, ANDREAS N S, LI R H, et al. Mitigating irreversible capacity loss for higher-energy lithium batteries[J]. Energy Storage Materials, 2022, 48: 44-73. DOI:10.1016/j.ensm.2022.03.004.
SIVAKKUMAR S R, PANDOLFO A G. Evaluation of lithium-ion capacitors assembled with pre-lithiated graphite anode and activated carbon cathode[J]. Electrochimica Acta, 2012, 65: 280-287. DOI:10.1016/j.electacta.2012.01.076.
JIN L M, YUAN J M, SHELLIKERI A, et al. An overview on design parameters of practical lithium-ion capacitors[J]. Batteries & Supercaps, 2021, 4(5): 749-757. DOI:10.1002/batt.202000296.
JIN L M, ZHENG J S, ZHENG J P. Theoretically quantifying the effect of pre-lithiation on energy density of Li-ion batteries[J]. Journal of the Electrochemical Society, 2021, 168(1): 010532. DOI:10.1149/1945-7111/abdb47.
LOKHANDE A C, KANAGARAJ A B, MANAGUTTI P B, et al. Experimental and theoretical investigation of silicon-based carbon composite electrode for high performance Li-ion capacitors[J]. Journal of Alloys and Compounds, 2024, 1003: 175665. DOI:10.1016/j.jallcom.2024.175665.
LV X R, ZHENG J S, LU Y Y, et al. CoMn 2 O 4 /CoMn 2 S 4 heterostructure as a superior-performance anode for lithium-ion capacitors[J ] . Journal of Energy Storage, 2026, 145: 119714. DOI:10.1016/j.est.2025.119714.
ZHENG J S, XING G G, ZHANG L Y, et al. A minireview on high-performance anodes for lithium-ion capacitors[J]. Batteries & Supercaps, 2021, 4(6): 897-908. DOI:10.1002/batt.202000292.
ZHENG J S, LANG X H, LV X R, et al. The synergistic effect of sodium carboxymethyl cellulose and polytetrafluoroethylene for highly stable graphite anodes[J]. Journal of Energy Storage, 2026, 149: 120249. DOI:10.1016/j.est.2025.120249.
QIN N, JIN L M, XING G G, et al. Decoupling accurate electrochemical behaviors for high-capacity electrodes via reviving three-electrode vehicles[J ] . Advanced Energy Materials, 2023, 13(11): 2204077. DOI:10.1002/aenm.202204077.
KUMAGAI S, ISHIKAWA T, SAWA N. Cycle performance of lithium-ion capacitors using graphite negative electrodes at different pre-lithiation levels[J]. Journal of Energy Storage, 2015, 2: 1-7. DOI:10.1016/j.est.2015.05.005.
SIMON P, GOGOTSI Y. Perspectives for electrochemical capacitors and related devices[J]. Nature Materials, 2020, 19(11): 1151-1163. DOI:10.1038/s41563-020-0747-z.
DONG H C, YANG T Z, LIU C W, et al. Controllable and scalable prelithiation of dry silicon-based anodes for high-energy-density lithium-ion batteries[J]. Energy Storage Materials, 2025, 75: 104072. DOI:10.1016/j.ensm.2025.104072.
MADABATTULA G, WU B, MARINESCU M, et al. Degradation diagnostics for Li 4 Ti 5 O 12 -based lithium ion capacitors: Insights from a physics-based model[J ] . Journal of the Electrochemical Society, 2020, 167(4): 043503. DOI:10.1149/1945-7111/ab7655.
JAGADALE A, ZHOU X, XIONG R, et al. Lithium ion capacitors (LICs): Development of the materials[J]. Energy Storage Materials, 2019, 19: 314-329. DOI:10.1016/j.ensm.2019.02.031.
LAI K L, GAO L Y, CHANG J K, et al. Advancing Li-ion capacitors through dual wet chemical prelithiation[J]. Journal of Colloid and Interface Science, 2024, 663: 685-696. DOI:10.1016/j.jcis.2024.02.199.
BANSAL N, HUSSAIN A, KUMAR N, et al. Nanoarchitectured in situ pre-lithiated carbon anodes for high-power and long-life Li-ion capacitors[J ] . Journal of Materials Chemistry A, 2025, 13(41): 35292-35307.
ZHANG X X, QU H N, JI W X, et al. Fast and controllable prelithiation of hard carbon anodes for lithium-ion batteries[J]. ACS Applied Materials & Interfaces, 2020, 12(10): 11589-11599.
KANG J, KOO B, KANG S, et al. Physicochemical nature of polarization components limiting the fast operation of Li-ion batteries[J]. Chemical Physics Reviews, 2021, 2(4): 041307. DOI:10.1063/5.0068493.
CAO W J, ZHENG J P. The effect of cathode and anode potentials on the cycling performance of Li-ion capacitors[J]. Journal of the Electrochemical Society, 2013, 160(9): A1572-A1576. DOI:10.1149/2.114309jes.
SHELLIKERI A, HUNG I, GAN Z H, et al. In situ NMR tracks real-time Li ion movement in hybrid supercapacitor-battery device[J ] . The Journal of Physical Chemistry C, 2016, 120(12): 6314-6323.
ZHANG J, SHI Z Q, WANG C Y. Effect of pre-lithiation degrees of mesocarbon microbeads anode on the electrochemical performance of lithium-ion capacitors[J]. Electrochimica Acta, 2014, 125: 22-28. DOI:10.1016/j.electacta.2014.01.040.
LI Y Y, LIU Y P, XUE L X, et al. Eliminating anion depletion region and promoting Li + solvation via anionphilic metal organic framework for dendrite-free lithium deposition[J ] . Nano Energy, 2022, 92: 106708. DOI:10.1016/j.nanoen.2021.106708.
KANG M J, JEONG S, HWANG G, et al. Study on direct-contact prelithiation of soft carbon anodes using lithium foil for lithium-ion capacitors[J]. Energies, 2025, 18(9): DOI:10.3390/en18092276.
CAO W J, SHIH J, ZHENG J P, et al. Development and characterization of Li-ion capacitor pouch cells[J]. Journal of Power Sources, 2014, 257: 388-393. DOI:10.1016/j.jpowsour.2014.01.087.
OU Y T, ZHANG B, ZHAN R M, et al. A salt-free medium facilitating electrode prelithiation towards fast-charging and high-energy lithium-ion batteries[J]. Nature Communications, 2025, 16: 7956. DOI:10.1038/s41467-025-63257-w.
LIN X K, KHOSRAVINIA K, HU X S, et al. Lithium plating mechanism, detection, and mitigation in lithium-ion batteries[J]. Progress in Energy and Combustion Science, 2021, 87: 100953. DOI:10.1016/j.pecs.2021.100953.
MOHAMMADI A, GHORBANZADE P, LÓPEZ DEL AMO J M, et al. From formation to reactivation of inactive lithium in lithium metal anodes[J]. ChemElectroChem, 2025, 12(20): e202500242. DOI:10.1002/celc.202500242.
LI Y C, ZHENG X Y, CAO Z, et al. Unveiling the mechanisms into Li-trapping induced (ir)reversible capacity loss for silicon anode[J]. Energy Storage Materials, 2023, 55: 660-668. DOI:10.1016/j.ensm.2022.12.032.
LV X R, ZHENG J S, LANG X H, et al. Electric double layer adsorption as a dual-function "medicine" for in-situ solid electrolyte interphase reconstruction and lithium supply on silicon-carbon anodes[J ] . Chemical Engineering Journal, 2026, 528: 172006. DOI:10.1016/j.cej.2025.172006.
LEE J, JIN D, KIM J Y, et al. Dry pre-lithiation for graphite-silicon diffusion-dependent electrode for all-solid-state battery[J]. Advanced Energy Materials, 2023, 13(25): 2300172. DOI:10.1002/aenm.202300172.
JIN L M, GUO X, SHEN C, et al. A universal matching approach for high power-density and high cycling-stability lithium ion capacitor[J]. Journal of Power Sources, 2019, 441: 227211. DOI:10.1016/j.jpowsour.2019.227211.
ABDOLLAHIFAR M, PAOLELLA A. "Dead lithium" formation and mitigation strategies in anode-free Li-metal batteries[J]. Batteries & Supercaps, 2025, 8(3): e202400505. DOI:10.1002/batt.202400505.
JIN C B, SHENG O W, WEI G Y, et al. Inhibiting and rejuvenating dead lithium in battery materials[J]. Nature Reviews Chemistry, 2025, 9(8): 553-568. DOI:10.1038/s41570-025-00722-6.
DENG W, QIU B, CHEN J H, et al. Understanding the degradation complexity of ultrahigh-energy lithium metal batteries[J]. Nature Reviews Chemistry, 2026: 1-17. DOI:10.1038/s41570-026-00801-2.
ZHANG Y M, SHEN H Y, LI Y Y, et al. Prelithiation strategies for enhancing the performance of lithium-ion batteries[J]. RSC Advances, 2025, 15(2): 1249-1274.
WANG C, YANG F Z, WAN W, et al. A large-area lithium metal-carbon nanotube film for precise contact prelithiation in lithium-ion batteries[J]. Energy & Environmental Science, 2023, 16(10): 4660-4669.
LU Y Y, ZHENG J S, LV X R, et al. Direct contact pre-lithiation for practical lithium ion batteries: Focus review[J]. Journal of Energy Chemistry, 2025, 102: 820-833. DOI:10.1016/j.jechem.2024.11.026.
JANG E, RYU S, KIM M, et al. Silicon-stabilized lithium metal powder (SLMP) composite anodes for fast charging by in-situ prelithiation[J ] . Journal of Power Sources, 2023, 580: 233326. DOI:10.1016/j.jpowsour.2023.233326.
CAO W J, ZHENG J P. Li-ion capacitors with carbon cathode and hard carbon/stabilized lithium metal powder anode electrodes[J]. Journal of Power Sources, 2012, 213: 180-185. DOI:10.1016/j.jpowsour.2012.04.033.
SHELLIKERI A, YTURRIAGA S, ZHENG J S, et al. Hybrid lithium-ion capacitor with LiFePO 4 /AC composite cathode—Long term cycle life study, rate effect and charge sharing analysis[J ] . Journal of Power Sources, 2018, 392: 285-295. DOI:10.1016/j.jpowsour.2018.05.002.
LU Y Y, LV X R, ZHENG J S, et al. Revealing the dynamic interface evolutions of electrochemical pre-lithiated graphite electrodes in practical workplace atmospheres[J]. Journal of Power Sources, 2024, 614: 235024. DOI:10.1016/j.jpowsour.2024.235024.
PEREZ-BELTRAN S, KUAI D C, BALBUENA P B. SEI formation and lithium-ion electrodeposition dynamics in lithium metal batteries via first-principles kinetic Monte Carlo modeling[J ] . ACS Energy Letters, 2024, 9(11): 5268-5278.
SHELLIKERI A, WATSON V, ADAMS D, et al. Investigation of pre-lithiation in graphite and hard-carbon anodes using different lithium source structures[J]. Journal of the Electrochemical Society, 2017, 164(14): A3914-A3924. DOI:10.1149/2.1511714jes.
ZHAO S S, SUN X Z, WANG N F, et al. Recent advances in hybrid lithium-ion capacitors: Materials and processes[J]. ACS Applied Energy Materials, 2024, 7(24): 11553-11570.
CHNG C J, MA X Y, ABE Y, et al. Hard carbon/graphite composite anode for durable lithium-ion capacitor[J]. Journal of Energy Storage, 2024, 92: 112193. DOI:10.1016/j.est.2024.112193.
TSENG L C, TAI C W, JAO W Y, et al. A novel efficient three-stage electrochemical pre-lithiation method for the amorphous carbon negative electrodes of lithium-ion capacitors[J]. Electrochimica Acta, 2024, 497: 144576. DOI:10.1016/j.electacta. 2024.144576.
JIN L M, SHEN C, WU Q, et al. Pre-lithiation strategies for next-generation practical lithium-ion batteries[J]. Advanced Science, 2021, 8(12): 2005031. DOI:10.1002/advs.202005031.
SATO Y, ROJAS O G, MAKINO S, et al. Li-metal free "in aqua" lithiation and re-lithiation of protected graphite anode for 4 V class aqueous lithium-ion capacitor[J]. Journal of Power Sources, 2024, 609: 234684. DOI:10.1016/j.jpowsour.2024.234684.
HE X W, MU X W, WANG Y G, et al. Fast and scalable complete chemical prelithiation strategy for Si/C anodes enabling high-performance Li x Si–S full cells[J ] . ACS Applied Energy Materials, 2023, 6(12): 6790-6796.
TAN R, LIU K X, ZHU X L, et al. Rational molecular design of aryl-lithium reagent enables precise chemical prelithiation of graphite anodes for achieving ideal 100% initial coulombic efficiency[J]. Journal of the American Chemical Society, 2025, 147(25): 21865-21876.
DECAUX C, LOTA G, RAYMUNDO-PIÑERO E, et al. Electrochemical performance of a hybrid lithium-ion capacitor with a graphite anode preloaded from lithium bis(trifluoromethane)sulfonimide-based electrolyte[J]. Electrochimica Acta, 2012, 86: 282-286. DOI:10.1016/j.electacta.2012.05.111.
LI M X, YUAN J S, JIN M J, et al. Elucidating the chemical pre-lithiation mechanism of hard carbon anodes for ultra-high stability lithium-ion batteries[J]. Small, 2025, 21(2): 2407919. DOI:10.1002/smll.202407919.
MAN Q Y, SHEN H T, WEI C L, et al. Rational design of F, N-rich artificial interphase via chemical prelithiation initiation strategy enabling high coulombic efficiency and stable micro-sized SiO anodes[J ] . Journal of Energy Chemistry, 2024, 92: 224-232. DOI:10.1016/j.jechem.2024.01.046.
SUN C K, ZHANG X, LI C, et al. High-efficiency sacrificial prelithiation of lithium-ion capacitors with superior energy-storage performance[J]. Energy Storage Materials, 2020, 24: 160-166. DOI:10.1016/j.ensm.2019.08.023.
PARK M S, LIM Y G, HWANG S M, et al. Scalable integration of Li 5 FeO 4 towards robust, high-performance lithium-ion hybrid capacitors[J ] . ChemSusChem, 2014, 7(11): 3138-3144. DOI:10.1002/cssc.201402397.
SU K, WANG Y, YANG B, et al. A review: Pre-lithiation strategies based on cathode sacrificial lithium salts for lithium-ion capacitors[J]. Energy & Environmental Materials, 2023, 6(6): e12506. DOI:10.1002/eem2.12506.
DU J M, WANG W Y, SHENG ENG A Y, et al. Metal/LiF/Li 2 O nanocomposite for battery cathode prelithiation: Trade-off between capacity and stability[J ] . Nano Letters, 2020, 20(1): 546-552.
TAO F J, YAO Z Y, HOU J H, et al. Molecularly engineered Li compensation agent-integrated separator enabling regeneration of degraded LiFePO 4 [J ] . Journal of Materials Chemistry A, 2026, 14(20): 12314-12324.
ZHU Y L, XU R Y, ZHENG Y C, et al. Unravelling the oxygen evolution mechanism of lithium-rich antifluorite prelithiation agent based on anionic oxidation[J]. Angewandte Chemie International Edition, 2025, 64(19): e202502126. DOI:10.1002/anie.202502126.
JIA C, SHEN Y F, WANG M, et al. A high-efficiency pre-lithiation strategy for Li-ion capacitor achieved by the synergistic effect of pre-lithiation and solid electrolyte interface film modification[J]. Journal of Energy Storage, 2024, 99: 113420. DOI:10.1016/j.est.2024.113420.
ZHENG L Y, LI G, ZHANG J J. Grain boundaries boost the prelithiation capability of the Li 2 CO 3 cathode additives for high-energy-density lithium-ion batteries[J ] . Chemical Engineering Journal, 2023, 475: 146285. DOI:10.1016/j.cej.2023.146285.
WANG Z Y, HAO W, DUAN T, et al. Temperature-potential coupled regulation of LiPF 6 decomposition to construct LiF grain boundary-rich interphase on graphite anode for fast-charging Li-ion batteries[J ] . Angewandte Chemie Int ernational Edition, 2026, 65(10): e25822. DOI:10.1002/anie.202525822.
SHEN C X, FU R S, XIA Y G, et al. New perspective to understand the effect of electrochemical prelithiation behaviors on silicon monoxide[J]. RSC Advances, 2018, 8(26): 14473-14478.
DONG Y T, CHEN Y M, YUE X Y, et al. Unveiling the adsorption tendency of film-forming additives to enable fast-charging hard carbon anodes with regulated Li plating[J]. Energy & Environmental Science, 2024, 17(7): 2500-2511.
LU Y Y, ZHENG J S, LV X R, et al. Temperature-regulated prelithiated graphite anode for an improved lithium-ion capacitor[J]. ACS Applied Energy Materials, 2024, 7(24): 11581-11589.
LU Y Y, LV X R, SHAO J C, et al. Temperature tailored robust solid electrolyte interface for improved high-areal-capacity prelithiated silicon-carbon anode[J]. Journal of Energy Chemistry, 2025, 109: 76-88. DOI:10.1016/j.jechem.2025.03.023.
HUANG X Y, ZHAO C Z, KONG W J, et al. Tailoring polymer electrolyte solvation for 600 Wh kg -1 lithium batteries[J ] . Nature, 2025, 646(8084): 343-350. DOI:10.1038/s41586-025-09565-z.
JI H J, XIANG J W, LI Y, et al. Liquid-liquid interfacial tension stabilized Li-metal batteries[J]. Nature, 2025, 643(8074): 1255-1262. DOI:10.1038/s41586-025-09293-4.
MI J S, YANG J, CHEN L K, et al. A ductile solid electrolyte interphase for solid-state batteries[J]. Nature, 2025, 647(8088): 86-92. DOI:10.1038/s41586-025-09675-8.
WU J Y, RAO Z X, LIU X T, et al. Polycationic polymer layer for air-stable and dendrite-free Li metal anodes in carbonate electrolytes[J]. Advanced Materials, 2021, 33(12): 2007428. DOI:10.1002/adma.202007428.
MATSUDA S, ONO M, MYOJIN A. Irreversible structural changes in lithium electrodes accelerate capacity fading in lithium-metal-based rechargeable batteries[J]. ACS Applied Energy Materials, 2023, 6(4): 2524-2530.
CAO Z, ZHENG X Y, QU Q T, et al. Electrolyte design enabling a high-safety and high-performance Si anode with a tailored electrode-electrolyte interphase[J]. Advanced Materials, 2021, 33(38): 2103178. DOI:10.1002/adma.202103178.
WU H, QU J, YAN X L, et al. Revealing the underlying role of Li 2 CO 3 in enhancing performance of oxyhalide-based solid-state batteries[J ] . Advanced Materials, 2025, 37(33): 2502067. DOI:10.1002/adma.202502067.
YANG M M, ZHANG J X, REN Z H, et al. Li 2 CO 3 /LiF-Rich solid electrolyte interface stabilized lithium metal anodes for durable Li-CO 2 batteries[J ] . Energy Storage Materials, 2024, 73: 103843. DOI:10.1016/j.ensm.2024.103843.
QIN N, JIN L M, LU Y Y, et al. Over-potential tailored thin and dense lithium carbonate growth in solid electrolyte interphase for advanced lithium ion batteries[J]. Advanced Energy Materials, 2022, 12(15): 2103402. DOI:10.1002/aenm.202103402.
LIU H, CHENG X P, CAO T C, et al. Achieving homogeneous Li deposition of 3D dendrite-free lithium metal anode through atomic layer deposition surface modification[J]. Materials Letters, 2023, 343: 134366. DOI:10.1016/j.matlet.2023.134366.
0
浏览量
5
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621