基于预钠化NVP正极和干法AC负极的钠离子电容器

裴梦凡; 樊智健; 孙冉; 蹇锡高; 胡方圆

doi:10.19799/j.cnki.2095-4239.2026.0174

您当前的位置：

首页 >

文章列表页 >

基于预钠化NVP正极和干法AC负极的钠离子电容器

超级电容器关键材料与器件专刊 | 更新时间：2026-05-28

- 基于预钠化NVP正极和干法AC负极的钠离子电容器
- Pre-sodiated NVP cathode coupled with dry-coated AC anode for high-performance sodium ion capacitors
- 储能科学与技术 2026年15卷第5期页码：1660-1670
- 作者机构：
  
  1.大连理工大学材料科学与工程学院
  2.大连理工大学化工学院，精细化工国家重点实验室，辽宁大连 116024
- 作者简介：
  
  裴梦凡（1998—），男，博士，研究方向为高性能钠离子电容器，E-mail：peimengf@126.com；
  胡方圆，教授，研究方向聚合物基电化学能源材料，E-mail：hufangyuan@dlut.edu.cn。
- 基金信息：
  
  教育部中央高校青年教师科研创新能力支持项目(ZYGXQNJSKYCXNLZCXM-M4);国家自然科学基金优秀青年基金(52222314);大连市杰出青年科技人才项目(2023RJ006)
- DOI：10.19799/j.cnki.2095-4239.2026.0174
  中图分类号： TM 53
- 收稿：2026-02-27，
  
  修回：2026-03-26，
  
  纸质出版：2026-05-28
- 稿件说明：
移动端阅览
裴梦凡, 樊智健, 孙冉, 等. 基于预钠化NVP正极和干法AC负极的钠离子电容器[J]. 储能科学与技术, 2026, 15(5): 1660-1670.

PEI Mengfan, FAN Zhijian, SUN Ran, et al. Pre-sodiated NVP cathode coupled with dry-coated AC anode for high-performance sodium ion capacitors[J]. Energy Storage Science and Technology, 2026, 15(5): 1660-1670.
裴梦凡, 樊智健, 孙冉, 等. 基于预钠化NVP正极和干法AC负极的钠离子电容器[J]. 储能科学与技术, 2026, 15(5): 1660-1670. DOI： 10.19799/j.cnki.2095-4239.2026.0174.

PEI Mengfan, FAN Zhijian, SUN Ran, et al. Pre-sodiated NVP cathode coupled with dry-coated AC anode for high-performance sodium ion capacitors[J]. Energy Storage Science and Technology, 2026, 15(5): 1660-1670. DOI： 10.19799/j.cnki.2095-4239.2026.0174.

摘要

通过干法涂布工艺提高电极负载是一种提高钠离子电容器电化学性能的有效方法。然而，当使用高负载干法活性炭（AC）电极作为负极时，电极中的聚四氟乙烯（PTFE）黏结剂在低电势下的不可逆反应会造成钠损失。本工作以干法活性炭电极片为负极，电化学预钠化的磷酸钒钠[Na

（PO

）

，NVP

]

为正极组装了高负载量的钠离子电容器，并通过X射线衍射、扫描电镜、球差校正透射电子显微镜和恒流充放电测试等表征，研究了预钠化的NVP正极在充放电过程中的补钠机制及其对钠离子电容器电化学的影响。结果表明，在恒流充放电的过程中，NVP正极在1.6 V（

. Na

/Na）处的额外储钠平台比容量约为50 mAh/g，通过电化学预钠化可以有效地激活该平台，在有效补钠的同时提高了器件的AC电极负载量。当采用预钠化的NVP正极与负载为10 mg/cm

的AC负极组装钠离子电容器时，基于正极活性物质质量的能量密度最大可达165 Wh/kg，功率密度最大可达4.15 kW/kg。同时，在50 C的电流密度下，循环20000次后容量保持率为75%。本研究的正极预钠化策略有助于推动高性能钠离子电容器的应用。

Abstract

Enhancin

g electrode loading through dry coating is a promising strategy for improving the electrochemical performance of sodium-ion capacitors (SICs). However

when high-loading dry-processed activated carbon (AC) electrodes serve as anodes

the irreversible reaction of the polytetrafluoroethylene binder at low potentials causes considerable sodium loss. To address this issue

high-loading SICs were assembled in this work using a dry-processed AC anode paired with an electrochemically pre-sodiated sodium vanadium phosphate [Na

(PO

)

NVP

]

cathode. The sodium compensation mechanism of the pre-sodiated NVP cathode during charge/discharge cycling and its influence on the electrochemical performance of SICs were systematically investigated using X-ray diffraction

scanning electron microscopy

spherical aberration-corrected transmission electron microscopy

and galvanostatic charge/discharge measurements. The findings reveal that the NVP cathode displays an additional sodium storage plateau at 1.6 V (

vs.

/Na) during galvanostatic cycling

delivering a specific capacity of approximately 50 mAh/g. Electrochemical pre-sodiation effectively activates this plateau

thereby compensating for sodium loss while increasing the practical loading of the AC electrode. The SIC assembled with the pre-sodiated NVP cathode and an AC anode at a high loading of 10 mg/cm

delivered a maximum energy density of 165 Wh/kg and a maximum power density of 4.15 kW/kg

calculated based on the cathode active material mass. Moreover

the device exhibited excellent cycling stability

retaining 75% of its initial capacity after 20

000 cycles at a current rate of 50 C. The cathode pre-sodiation strategy proposed herein offers a viable pathway for advancing the development of high-performance SICs.

关键词

Keywords

references

GULRAIZ A, AL BASTAKI A J, MAGAMAL K, et al. Energy advancements and integration strategies in hydrogen and battery storage for renewable energy systems[J]. iScience, 2025, 28(3): 111945. DOI:10.1016/j.isci.2025.111945.

LI Y Z, DING Y Z, HE S Y, et al. Artificial intelligence-based methods for renewable power system operation[J]. Nature Reviews Electrical Engineering, 2024, 1(3): 163-179. DOI:10. 1038/s44287-024-00018-9.

彭鹏, 赵宇鑫, 李福, 等. 数据中心储能型不间断电源系统及其控制技术[J]. 储能科学与技术, 2024, 13(5): 1574-1583.

PENG P, ZHAO Y X, LI F, et al. Energy storage type of UPS and its control method in Internet data centers[J]. Energy Storage Science and Technology, 2024, 13(5): 1574-1583.

ALE L, ZHANG N, KING S A, et al. Empowering generative AI through mobile edge computing[J]. Nature Reviews Electrical Engineering, 2024, 1(7): 478-486. DOI:10.1038/s44287-024-00053-6.

HU Y J, WU M M, CHI F Y, et al. Ultralow-resistance electrochemical capacitor for integrable line filtering[J]. Nature, 2023, 624(7990): 74-79. DOI:10.1038/s41586-023-06712-2.

KANG B, CEDER G. Battery materials for ultrafast charging and discharging[J]. Nature, 2009, 458(7235): 190-193. DOI:10.1038/nature07853.

XIAO C L, WANG H G, USISKIN R, et al. Unification of insertion and supercapacitive storage concepts: Storage profiles in titania[J]. Science, 2024, 386(6720): 407-413. DOI:10.1126/science.adi5700.

ZHU Y W, MURALI S, STOLLER M D, et al. Carbon-based supercapacitors produced by activation of graphene[J]. Science, 2011, 332(6037): 1537-1541. DOI:10.1126/science.1200770.

JEŻOWSKI P, CROSNIER O, DEUNF E, et al. Safe and recyclable lithium-ion capacitors using sacrificial organic lithium salt[J]. Nature Materials, 2018, 17(2): 167-173. DOI:10.1038/nmat5029.

SIMON P, GOGOTSI Y. Perspectives for electrochemical capacitors and related devices[J]. Nature Materials, 2020, 19(11): 1151-1163. DOI:10.1038/s41563-020-0747-z.

LIU S Y, CHENG H T, MAO R Y, et al. Designing zwitterionic gel polymer electrolytes with dual-ion solvation regulation enabling stable sodium ion capacitor (adv. energy mater. 18/2023)[J]. Advanced Energy Materials, 2023, 13(18): 2370072. DOI:10. 1002/aenm.202370072.

PEI M F, JIN X, MAO R Y, et al. Decoupling self-matching effect between cathode and anode in hybrid electrochemical capacitors[J]. Advanced Materials, 2025, 37(32): 2507061. DOI:10.1002/adma.202507061.

YAN Z R, FAN S C, SONG Y T, et al. Scaleup sodium-ion capacitor ah-level pouch cells enable 100 C ultrafast charging capabilities[J]. Angewandte Chemie International Edition, 2026, 65(3): e18339. DOI:10.1002/anie.202518339.

PEI M F, LIU D M, JIN X, et al. Na 2 S in-situ infiltrated in actived carbon as high-efficiency presodiation additives for sodium ion hybrid capacitors[J ] . Carbon Neutralization, 2024, 3(3): 461-470. DOI:10.1002/cnl2.127.

FAN S C, YAN Z R, WANG B H, et al. Unlocking limited electric double-layer capacity via electrochemically-driven continuous partial desolvations in carbon nanopores[J ] . Nature Communications, 2026, 17: 363. DOI:10.1038/s41467-025-66433-0.

BUQA H, HOLZAPFEL M, KRUMEICH F, et al. Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries[J]. Journal of Power Sources, 2006, 161(1): 617-622. DOI:10.1016/j.jpowsour.2006. 03.073.

MA F F, ZHANG N, WEI X, et al. Blend-electrospun poly(vinylidene fluoride)/polydopamine membranes: Self-polymerization of dopamine and the excellent adsorption/separation abilities[J]. Journal of Materials Chemistry A, 2017, 5(27): 14430-14443. DOI:10.1039/c7ta02845h.

LI Y X, WU Y J, WANG Z X, et al. Progress in solvent-free dry-film technology for batteries and supercapacitors[J]. Materials Today, 2022, 55: 92-109. DOI:10.1016/j.mattod.2022.04.008.

TAO R M, STEINHOFF B, SUN X G, et al. High-throughput and high-performance lithium-ion batteries via dry processing[J ] . Chemical Engineering Journal, 2023, 471: 144300. DOI:10.1016/j.cej.2023.144300.

CHOI N S, HA S Y, LEE Y, et al. Recent progress on polymeric binders for silicon anodes in lithium-ion batteries[J]. Journal of Electrochemical Science and Technology, 2015, 6(2): 35-49. DOI:10.5229/jecst.2015.6.2.35.

GAO S Y, SU Y F, BAO L Y, et al. High-performance LiFePO 4 /C electrode with polytetrafluoroethylene as an aqueous-based binder[J ] . Journal of Power Sources, 2015, 298: 292-298. DOI:10.1016/j.jpowsour.2015.08.074.

TAO R M, STEINHOFF B, SAWICKI C H, et al. Unraveling the impact of the degree of dry mixing on dry-processed lithium-ion battery electrodes[J]. Journal of Power Sources, 2023, 580: 233379. DOI:10.1016/j.jpowsour.2023.233379.

WEI Z Q, KONG D W, QUAN L J, et al. Removing electrochemical constraints on polytetrafluoroethylene as dry-process binder for high-loading graphite anodes[J]. Joule, 2024, 8(5): 1350-1363. DOI:10.1016/j.joule.2024.01.028.

LI G B, XUE R J, CHEN L Q. The influence of polytetrafluorethylene reduction on the capacity loss of the carbon anode for lithium ion batteries[J]. Solid State Ionics, 1996, 90(1/2/3/4): 221-225. DOI:10.1016/S0167-2738(96)00367-0.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

不同预钠化比例对AC//HC型钠离子电容器的性能影响

预锂化对AC//Nb2O5型锂离子电容器性能的影响

助力钠电池储能：预钠化技术研究新进展

数据驱动的直写式3D打印：超级电容器厚电极的微观结构调控与动力学优化

高倍率型MXene基复合薄膜电极的氧化重构制备与界面调控