基于流-固-热三场耦合模型的不同蜂窝单元相变石蜡熔化特性

陈俊旗; 王明星; 李洁; 王辉

doi:10.19799/j.cnki.2095-4239.2025.0887

您当前的位置：

首页 >

文章列表页 >

基于流-固-热三场耦合模型的不同蜂窝单元相变石蜡熔化特性

储能材料与器件 | 更新时间：2026-05-28

- 基于流-固-热三场耦合模型的不同蜂窝单元相变石蜡熔化特性
- Melting characteristics of phase change paraffin in honeycomb cells based on a fluid-solid-heat three-field coupling model
- 储能科学与技术 2026年15卷第2期页码：363-373
- 作者机构：
  
  1.河南工业大学土木工程学院，河南郑州 450001
  2.海南大学土木建筑工程学院，海南海口 570228
- 作者简介：
  
  陈俊旗（1983—），男，博士，副教授，研究方向为相变材料，E-mail：chenjunqi@haut.edu.cn。
- 基金信息：
  
  国家自然科学基金项目(12072107)
- DOI：10.19799/j.cnki.2095-4239.2025.0887
  中图分类号： TK 124
- 收稿：2025-09-30，
  
  修回：2025-11-18，
  
  纸质出版：2026-02-28
- 稿件说明：
移动端阅览
陈俊旗, 王明星, 李洁, 等. 基于流-固-热三场耦合模型的不同蜂窝单元相变石蜡熔化特性[J]. 储能科学与技术, 2026, 15(2): 363-373.

CHEN Junqi, WANG Mingxing, LI Jie, et al. Melting characteristics of phase change paraffin in honeycomb cells based on a fluid-solid-heat three-field coupling model[J]. Energy Storage Science and Technology, 2026, 15(2): 363-373.
陈俊旗, 王明星, 李洁, 等. 基于流-固-热三场耦合模型的不同蜂窝单元相变石蜡熔化特性[J]. 储能科学与技术, 2026, 15(2): 363-373. DOI： 10.19799/j.cnki.2095-4239.2025.0887.

CHEN Junqi, WANG Mingxing, LI Jie, et al. Melting characteristics of phase change paraffin in honeycomb cells based on a fluid-solid-heat three-field coupling model[J]. Energy Storage Science and Technology, 2026, 15(2): 363-373. DOI： 10.19799/j.cnki.2095-4239.2025.0887.

摘要

金属蜂窝结构具有轻质化、大表面积和优良的导热特性，与相变材料结合，能够有效克服纯相变材料热导率低的天然缺陷。为了研究不同形状蜂窝单元中相变材料的无约束熔化特性，本工作采用等效热容法控制固-液相变过程的潜热储存，引入Boussinesq假设描述浮升力驱动的液相自然对流运动，构建了经实验验证的流-固-热三场耦合数值模型，系统分析了三角形、菱形、矩形、六边形和圆形等5种蜂窝单元内相变石蜡的熔化过程。结果表明：自然对流显著加速了石蜡内的热量传输，并提升了熔化速率，整个熔化过程中，三角形单元内自然对流作用效果明显，相比无自然对流熔化时间可节省92%；单元布置方式和单元几何形态对熔化效率同样影响显著，其中倒置三角形单元与正置布置方式相比，平均熔化速率再次提升了38.58%；此外，三角形作为熔化速率最高的单元构型，在不同的高宽比下与经典的六边形蜂窝单元相比，分别提升了12.03%、16.56%、21.25%和16.11%；以增强比率为判定依据，当三角形单元的高宽比为1.0时，其熔化速率最高，完全熔化时间节省21.25%。

Abstract

Metal honeycomb structures are characterized by light weight

large surface area

and excellent thermal conductivity. When combined with phase change materials (PCMs)

the inherent drawback of low thermal conductivity in pure PCMs can be effectively mitigated. This study focuses on the unconstrained melting behavior of PCMs in honeycomb cells with different shapes. The effective heat capacity method is adopted to account for latent heat storage during the solid-liquid phase change process. The Boussinesq approximation is introduced to describe natural convection in the liquid phase driven by buoyancy. A fluid-solid-thermal multiphysics coupled numerical model is established and validated experimentally. Based on the validated model

the melting processes of phase change paraffin in five types of honeycomb cells (triangular

rhombic

rectangular

hexagonal

and circular) are systematically analyzed. The results show that natural convection significantly accelerates heat transfer in paraffin and enhances the melting rate. Throughout the entire melting process

the effect of natural convection in the triangular cell is significant

reducing the total melting time by 92% compared with the case without natural convection. The cell arrangement mode and geometric shape of the cell have significant effects on melting efficiency. Specifically

the average melting rate of the inverted triangular unit is increased by 38.58% compared with that of the upright unit. In addition

as the unit configuration with the highest melting rate

the triangular unit shows improvements of 12.03%

16.56%

21.25%

and 16.11%

respectively

compared with the classical hexagonal honeycomb unit under different height-to-width ratios. Using the enhancement ratio as the criterion

the triangular unit achieves the highest melting rate at a height-to-width ratio of 1.0

with the complete melting time reduced by 21.25%.

关键词

Keywords

references

刘伟, 李振明, 刘铭扬, 等. 高温相变储热材料制备与应用研究进展[J]. 储能科学与技术, 2023, 12(2): 398-430. DOI: 10.19799/j.cnki.2095-4239.2022.0521.

LIU W, LI Z M, LIU M Y, et al. Review of high-temperature phase change heat storage material preparation and applications[J]. Energy Storage Science and Technology, 2023, 12(2): 398-430. DOI: 10.19799/j.cnki.2095-4239.2022.0521.

代建龙, 李果, 曹一通, 等. 多孔金属泡沫强化石蜡相变蓄热性能[J]. 储能科学与技术, 2024, 13(11): 3764-3771. DOI: 10.19799/j.cnki.2095-4239.2024.0449.

DAI J L, LI G, CAO Y T, et al. Enhancing phase change heat storage performance of paraffin using porous metal foam[J]. Energy Storage Science and Technology, 2024, 13(11): 3764-3771. DOI: 10.19799/j.cnki.2095-4239.2024.0449.

KAMKARI B, SHOKOUHMAND H. Experimental investigation of phase change material melting in rectangular enclosures with horizontal partial fins[J]. International Journal of Heat and Mass Transfer, 2014, 78: 839-851. DOI: 10.1016/j.ijheatmasstransfer. 2014.07.056.

ABDULATEEF A M, ABDULATEEF J, MAT S, et al. Experimental and numerical study of solidifying phase-change material in a triplex-tube heat exchanger with longitudinal/triangular fins[J]. International Communications in Heat and Mass Transfer, 2018, 90: 73-84. DOI: 10.1016/j.icheatmasstransfer.2017.10.003.

MAHDI J M, LOHRASBI S, GANJI D D, et al. Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger[J ] . International Journal of Heat and Mass Transfer, 2018, 124: 663-676. DOI: 10.1016/j.ijheatmasstransfer.2018.03.095.

JI C Z, QIN Z, DUBEY S, et al. Simulation on PCM melting enhancement with double-fin length arrangements in a rectangular enclosure induced by natural convection[J]. International Journal of Heat and Mass Transfer, 2018, 127: 255-265. DOI: 10.1016/j.ijheatmasstransfer.2018.07.118.

LI Y, GUO B, HUANG G F, et al. Characterization and thermal performance of nitrate mixture/SiC ceramic honeycomb composite phase change materials for thermal energy storage[J]. Applied Thermal Engineering, 2015, 81: 193-197. DOI: 10.1016/j.applthermaleng.2015.02.008.

EGOLF P W, AMACKER N, GOTTSCHALK G, et al. A translucent honeycomb solar collector and thermal storage module for building façades[J]. International Journal of Heat and Mass Transfer, 2018, 127: 781-795. DOI: 10.1016/j.ijheatmasstransfer. 2018.06.111.

HASSE C, GRENET M, BONTEMPS A, et al. Realization, test and modelling of honeycomb wallboards containing a phase change material[J]. Energy and Buildings, 2011, 43(1): 232-238. DOI: 10.1016/j.enbuild.2010.09.017.

LIU F, WANG J F, LIU Y Q, et al. Natural convection characteristics of honeycomb fin with different hole cells for battery phase-change material cooling systems[J]. Journal of Energy Storage, 2022, 51: 104578. DOI: 10.1016/j.est.2022.104578.

邓雅军, 卞瑞豪, 王文昭, 等. 太阳能热发电的多级蓄热技术研究进展[J]. 科学技术与工程, 2021, 21(13): 5179-5187. DOI: 10.3969/j.issn.1671-1815.2021.13.003.

DENG Y J, BIAN R H, WANG W Z, et al. Review on multi-stage thermal storage systems for solar power generation[J]. Science Technology and Engineering, 2021, 21(13): 5179-5187. DOI: 10.3969/j.issn.1671-1815.2021.13.003.

吴延鹏, 刘乾隆, 田东民, 等. 相变材料与热管耦合的电子器件热管理研究进展[J]. 化工学报, 2023, 74(S1): 25-31. DOI: 10.11949/0438-1157.20230069.

WU Y P, LIU Q L, TIAN D M, et al. A review of coupling PCM modules with heat pipes for electronic thermal management[J]. CIESC Journal, 2023, 74(S1): 25-31. DOI: 10.11949/0438-1157.20230069.

董菲菲, 卫宽宽. 绿色建筑能源的循环利用[J]. 储能科学与技术, 2024, 13(3): 949-951. DOI: 10.19799/j.cnki.2095-4239.2024.0133.

DONG F F, WEI K K. Research on the recycling of green building energy[J]. Energy Storage Science and Technology, 2024, 13(3): 949-951. DOI: 10.19799/j.cnki.2095-4239.2024.0133.

谢鹏, 蔡振豪, 罗睿林, 等. 基于金属相变材料储热的严寒地区电动客车热管理系统研究[J]. 汽车工程, 2025, 47(8): 1546-1558. DOI: 10.19562/j.chinasae.qcgc.2025.08.011.

XIE P, CAI Z H, LUO R L, et al. Research on thermal management system of electric buses for extreme cold regions based on thermal energy storage with metallic phase change material[J]. Automotive Engineering, 2025, 47(8): 1546-1558. DOI: 10.19562/j.chinasae.qcgc.2025.08.011.

SEETOH I P, JOVIN D, LAI C Q. Effect of geometrical design on the latent heat cooling properties of a lightweight two-phase composite[J]. Applied Physics Letters, 2021, 119(14): 141908. DOI: 10.1063/5.0065433.

刘芳, 杨志鹏, 袁卫星, 等. 电子芯片散热技术的研究现状及发展前景[J]. 科学技术与工程, 2018, 18(23): 163-169. DOI: 10.3969/j.issn.1671-1815.2018.23.022.

LIU F, YANG Z P, YUAN W X, et al. Research status and development prospect of the chip cooling technologies[J]. Science Technology and Engineering, 2018, 18(23): 163-169. DOI: 10.3969/j.issn.1671-1815.2018.23.022.

郭梦雪. 含金属骨架石蜡融化传热特性实验研究[D]. 济南: 山东建筑大学, 2020.GUO M X. Experimental study on heat transfer characteristics of paraffin melting with metal framework[D]. Jinan: Shandong Jianzhu University, 2020.

张嘉杰, 屈治国, 马素霞, 等. 空心铝合金结构填充相变材料的换热特性[J]. 化工学报, 2017, 68(5): 1845-1851. DOI: 10.11949/j.issn.0438-1157.20161417.

ZHANG J J, QU Z G, MA S X, et al. Heat transfer performance of hollow aluminium structure filled with PCM[J]. CIESC Journal, 2017, 68(5): 1845-1851. DOI: 10.11949/j.issn.0438-1157.20161417.

XIE B, CHENG W L, XU Z M. Studies on the effect of shape-stabilized PCM filled aluminum honeycomb composite material on thermal control[J]. International Journal of Heat and Mass Transfer, 2015, 91: 135-143. DOI: 10.1016/j.ijheatmasstransfer. 2015.07.108.

ERLBECK L, SCHREINER P, SCHLACHTER K, et al. Adjustment of thermal behavior by changing the shape of PCM inclusions in concrete blocks[J]. Energy Conversion and Management, 2018, 158: 256-265. DOI: 10.1016/j.enconman.2017. 12.073.

LIU Z X, YU Z, YANG T T, et al. A review on macro-encapsulated phase change material for building envelope applications[J]. Building and Environment, 2018, 144: 281-294. DOI: 10.1016/j.buildenv.2018.08.030.

DHAIDAN N S, KHODADADI J M. Melting and convection of phase change materials in different shape containers: A review[J]. Renewable and Sustainable Energy Reviews, 2015, 43: 449-477. DOI: 10.1016/j.rser.2014.11.017.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

金属翅片对相变材料熔化储热速率的强化机理研究

用于户外锂离子电池热管理的低成本柔性双模式相变材料研究

耦合微通道与相变材料的太阳能光伏/热系统实验研究

十水硫酸钠水合盐凝胶的制备及其表面张力调控

多级梯度孔隙钙基热化学储能反应床结构优化